What preparatory work should be done before the mica board is produced?

1. Put the tools and measuring tools on the workbench, and check whether the measuring tools are aligned to zero;

2. Check whether the mica board is normal, if it is abnormal, immediately report the repair personnel to repair;

3. Prepare semi-finished products and materials according to the production plan, and check whether the semi-finished products and materials are qualified and meet the process requirements, and install the qualified copper wire on the pay-off rack, and adjust the tension;

4. Hang the gears according to the wrapping pitch required by the process, and select the wrapping die according to the process requirements;

5. According to the mica plate required by the process, install the mica plate on the wrapping head in turn according to the number of wrapping layers, adjust the tension of the mica plate, and pull the wrapping guide rod of the mica plate to the front of the mold in turn;

6. Prepare the take-up reel as required, check whether the reel is intact, and install the take-up reel on the take-up stand;

7. Pull the traction wire around the traction wheel for 3-4 turns, fix one end of the traction wire on the take-up reel, and pull the other end to the front of the wrapping die.