What are the drilling and slitting operations in mica plate processing?

1. Drilling

This is a common processing method. Drilling is not an easy job, but it is relatively free. Generally, the consumables and equipment used in the drilling room are drilling rigs, drill nozzles, rubber particles, wooden backing plates, aluminum backing plates, etc., drill nozzles Loss and loss of backing pads Epoxy gaskets are huge, and many small companies generally use drill bits and milling cutters from one factory.

In addition, the common method of drilling is to retain insulating parts. As an energy-saving industry, it has been popular in recent years. This feature has broadened the application field of mica boards again. Generally, the processing method of insulating parts is to drill holes and then drill a circle. That is, the processing method is relatively simple.

2. Slitting

This is a common and common processing method in the market. Most stores have a cutting machine for cutting boards, and this is generally rough, and the size of the public service can be controlled. Many companies that make mica boards have done For more than a few years, the cutting machine made of angle iron welding is still used. This method has no technical content, but the profit is not small. For example, sometimes one and a half sheets are cut into multiple sheets in normal accounting, which is a bit wasteful, but there is a way to cut the board into small sheets. If the quantity is large, the profit is very considerable.